It’s a fair guess that if you’ve completed a maintenance course you’ll be looking to build your own toolkit. And if you’ve been reading about attending a £75 college course then a £19k, 1115-piece Teng toolbox might be out of your price bracket, writes Bob Pickett.
That said, avoid cheap tools. Quality tools are made of better grade metal to much higher tolerances. Cheap metal flexes and bends, plus they don’t fit as well so they’re far more likely to mangle the bolt/nut or just break the tool (I’ve seen it happen, spanner head snap and shoot across the garage!). Same goes for screwdrivers; cheap ones don’t fit well and the tips distort so you end up destroying the screw head, especially if the screws are cheap, too.

A solid alternative is the Halfords Advanced range. Made from durable alloy steel, they come with a lifetime guarantee (as long as they’re used for the purpose for which they were designed, Halfords will replace any broken tool free of charge). The spanners are designed to grip the flat side of the fastener rather than the corners, reducing risk of rounding. The screwdrivers feature a metal rod that goes deep into the handle making it less likely to come loose, plus magnetic heads to stop you dropping/losing the screw you just loosened.

I needed tools that could be put to use across a range of jobs. I also wanted decent storage (to ensure I put them away properly and hopefully don’t lose one), so I went for Halfords’ Modular Tray System.
Each set comes in a laser-cut foam tray that sits neatly in any of Halfords’ tool boxes and chests. With a pre-cut space for each tool it means you can see at a glance if one is missing.

I already had a decent little socket set and hex keys, so I went for:
- 4-piece plier set (£35): Diagonal Cutter, Linesman, Locking and Long Nose Pliers
- 12-piece combination spanner set (£35): 8-19mm spanners
- 10-piece screwdriver set (£26.50): Cross point screwdrivers: #00–#3, Plain slot screwdrivers: 2–5.5mm
- 3-drawer metal portable tool chest (£39): Three drawers plus a top space for other items.

Cost: £140 for the tools to cover most of the jobs you’ll do. If you’re starting from scratch then throw in a 7-piece hex key set (£26.50) and a 44-piece ¼” socket set (£50); possibly a second portable chest – the price jump to a 6-drawer is huge; chuck in a rubber hammer, a magnetic tray, cable ties and duct tape, and you’re all but set up for around £260.
Check out Bob’s article on attending a motorcycle mechanic beginner course here: https://chasethesunset.co.uk/skills-time-to-get-spannering/




